Tile flashing
Valleys, walls, chimneys and pipes get flashing sized for tile to handle the deep curves of tile.
Tile Roofing
Tile Roof Installation Englewood, NJ
A Englewood tile roofer can help choose between clay and concrete, flat or curved profiles, and install the full system beneath the tile. Call (551) 355-3321 to reach a local roofer who installs tile.
The first decision on a tile roof has nothing to do with color. Clay and concrete tile weigh far more than shingles, so homes framed for a lighter roof often need a structural review and sometimes added framing. New homes designed for tile have the load built in from the start.
Next comes the material. Fired clay is the long lasting classic, while concrete tile is a sturdy, widely available option whose surface color softens with age. The profile can be flat, low curve or high curve, and each handles water and wind a little differently.
The tile may last generations, but the layers below it decide when the roof leaks. Codes typically allow tile on slopes down to 2.5 in 12, with two layers of underlayment required on slopes under 4 in 12. Choosing a long lasting underlayment now is what keeps the roof from needing a relay in twenty years.
Depending on what the roofer finds, tile roof installation in Englewood, NJ can go hand in hand with tile roof replacement and roof installation.
Dealing with this in Englewood, NJ right now? Call (551) 355-3321 and describe the problem to a roofer who works in Englewood.
Call nowThe process
What happens during a tile roof installation
Each layer of a tile roof has a job, and the order matters.
Plan for the load
Before ordering tile, the load on the rafters or trusses is checked, reinforcement is planned if needed and the permit is filed. It is smart to keep a stack of spare tile from the same batch for future repairs.
Prepare the deck
Decking is checked and fastened, drip edge goes on, and the deck is covered with the chosen underlayment, with self-adhered membrane in valleys and at eaves where ice or wind-driven rain is a concern. Since this layer does the waterproofing, it is where quality matters most.
Batten layout
Battens run horizontally to hold each course of tile, often raised on counter battens to leave a drainage and air space below. Some systems skip battens and fasten tile directly, depending on the profile and the slope.
Flash every penetration
Flashing goes in at valleys, sidewalls, headwalls, skylights and pipes, sized for the deep profile of tile. Flashing for tile is built for the depth of the tile, which is why shingle flashing details do not carry over.
Fasten each course
Tile goes on from the eave up, with an eave closure to keep birds out and fasteners or foam adhesive chosen for local wind requirements. Cut tiles at hips and valleys are fastened too, since small pieces are the first to blow off.
Seal the top
Hips and ridges are capped, often with a mechanically fastened system that allows ridge ventilation. The roof is cleaned, broken pieces are replaced and spares are left with the owner.
What is included
What tile roof installation includes
Eave closures
Bird stops close the eave and caps seal the ridge with ventilation where the design calls for it.
Waterproof layer
Doubled or self-adhered underlayment goes down where needed lapped to shed water to the eaves.
Load check
The framing is checked for the weight of tile and reinforced where needed.
Tile fastening
Battens or direct fastening hold every course in a pattern set by the tile profile.
Related service
Barrel Tile Roof Installation Englewood, NJ
Barrel tile is the classic two-piece tile roof: half-round pan tiles laid concave side up, with cover tiles laid over the joints between them. The tapered shape lets each tile nest into the one below, creating the deep rolling texture barrel roofs are known for. Because of that depth, barrel tile needs careful work at the eaves, hips and ridges, where the open curves must be closed off.
For barrel tile installation on an Englewood home, each cover tile is secured with nails, wire ties, clips or foam adhesive, depending on the slope and wind rules. Straight, evenly spaced rows take chalk lines and patience on the deck.
Related service
Spanish Tile Roof Installation Englewood, NJ
Spanish tile, also called S tile, merges the curved pan and cover into one interlocking piece. Clay and concrete Spanish tile are both common, in solid and blended colors. Side interlocks help it shed water, though the curved ends need bird stops and ridge closures just like barrel tile.
Spanish tile roof installation in Englewood follows the same system as any tile roof, from structure check to underlayment, flashing and tile. Flashing around chimneys, walls and skylights has to be shaped to the S curve, often with formed metal or a flexible flashing material. With a color blend, tile is drawn from several pallets as it goes up so no area looks patchy.
Local help
Tile Roof Installation Near Me
Tile roofs in Englewood go onto newer homes built for them and onto older homes where owners are switching from shingles. In Englewood and neighboring communities including Englewood Cliffs, Leonia, Tenafly and Bergenfield, the biggest variable on a conversion is whether the existing framing can carry tile, while homes already built for tile can usually go straight to choosing a profile and color.
Need tile roof installation around Englewood? Call (551) 355-3321 for an Englewood roofer who serves the towns around it too.
What the local climate does to a roof
Winters here are long and cold, with snow on the roof for weeks at a time and plenty of nights below freezing. When warm attic air melts the snow, the meltwater runs down and freezes again at the eaves, building ice dams that push water up under the shingles. Coastal storms and heavy spring rain drive water sideways into flashing, valleys and old chimneys. That is why roof repair in Englewood is busiest after a hard winter and before the next one.
Why call
Why fix it now
Drier ceilings
A roof problem fixed early rarely spreads to the decking, the insulation or the ceilings.
Local knowledge
Local roofers see the same roofs and storm damage across Englewood and nearby towns.
Straight answers
Ask the roofer about the cause, the options and the estimate before work starts.
Tile Roof Installation questions
How heavy is a tile roof?
Tile weighs several times as much as asphalt shingles, with concrete tile usually the heaviest. Whether a given house can carry it depends on the framing, which is why conversions from shingles start with a structural review. Some lighter weight tile products are made for homes with less structural capacity.
How long does tile roof installation take?
A typical home takes longer than a shingle roof, often one to a few weeks depending on size, complexity and weather. Complex rooflines and framing work before tiling can stretch the schedule. Once the underlayment is down, the house is protected from rain while tile goes on.
Which underlayment is best for tile?
Tile roofs use heavy felt, synthetic underlayment or self-adhered membrane, sometimes in two layers. Since the tile can outlast the underlayment by decades, a longer lasting underlayment pays off. On slopes below 4 in 12, code requires two layers.
Can tile be installed over an existing roof?
A tile roof needs a bare deck, so existing shingles or other roofing are removed. Tear-off exposes the decking so rotted boards can be replaced and the new underlayment can lap correctly.
Should I choose clay or concrete roof tile?
Each has real strengths. Clay keeps its color through the tile, is lighter than most concrete tile and can last for generations. Concrete tile comes in many profiles and finishes, but it is heavier, absorbs more water and its color fades over time.
More questions? Call (551) 355-3321
Other services that may help
Tile Roof Replacement
Tile roof replacement that strips the roof to the deck, renews the underlayment and flashing and puts sound tile back on, so the layers under the tile last as long as the tile.
Learn moreRoof Installation
Installing a new roof layer by layer, from drip edge and underlayment to flashing, vents and the finished roofing, with ventilation and flashing planned in from the start.
Learn moreTile Roof Inspection
Tile roof inspections that count broken and slipped tiles, check the layers beneath and estimate how much life is left, with a written report of what needs attention now and what can wait.
Learn moreRoof Ventilation
Balancing attic intake and exhaust with soffit vents, ridge vents and attic fans, so shingles and decking last as long as they should.
Learn more
Looking for something else?
See all roofing servicesGet tile roof installation help in Englewood
Call (551) 355-3321 to talk to a roofer serving Englewood, NJ.