Choosing a shingle
The roofer helps compare shingle types and to the weather the roof will face.
Shingle Roofing
Shingle Roof Installation Englewood, NJ
A roofer in Englewood can install a new shingle roof from the deck up: drip edge, ice and water shield, underlayment, starter strip, shingles, flashing and ridge vent, with nailing and flashing done to the shingle instructions. Call (551) 355-3321 to reach a local roofer.
What you see from the street is maybe half of a shingle roof. Underneath sit the drip edge, an ice and water shield along the eaves and in the valleys, underlayment across the deck and a starter strip that seals the first course. Flashing and attic ventilation round it out, and most leaks on newer roofs come from those details rather than the shingles.
Choosing the shingle comes before any of the layers. 3-tab shingles are thin and uniform, and architectural shingles are thicker laminated shingles with a textured, shadowed look and higher wind ratings. Where hail is a concern, Class 4 impact-resistant shingles are worth a look, and your insurer can tell you whether they change anything on your policy.
Not every roof can take shingles. Asphalt shingles generally need a slope of at least 2 in 12, and roofs between 2 in 12 and 4 in 12 need extra underlayment. Flat sections are flagged during the estimate so the right material goes on each part.
If the problem goes deeper than it first looked, an Englewood roofer may also recommend shingle roof replacement or roof installation.
Looking for Englewood shingle roof installation? Call (551) 355-3321 and describe the problem to a roofer who works in Englewood.
Call nowThe process
The order of a shingle installation
Here is the order a roofer follows on a new shingle roof.
Prepare the deck
Sheathing has to be flat, dry and well fastened, so loose sheets are renailed and damaged ones replaced. A wet deck is never covered.
Seal the edges
The eaves get drip edge and a band of ice and water shield, and the valleys get a full-length strip. Where ice dams form, codes call for the barrier to reach beyond the warm wall line.
Lay the underlayment
Underlayment covers the deck in shingled rows, and the rake edges get their drip edge after it. Synthetic underlayment is lighter, stronger and less likely to wrinkle than felt.
Set the first course
The starter row seals the bottom edge and rakes of the roof. That is where wind damage usually begins on a poorly built roof.
Shingle the field
Each course is nailed in the nailing zone, never high or overdriven, and step flashing goes in piece by piece at every sidewall. Valleys are either open metal or closed-cut shingle valleys.
Cap the roof
A ridge vent is cut in along the peak and capped with hip and ridge shingles, balanced with soffit intake at the eaves. Too little intake makes a ridge vent pull air the wrong way.
What is included
Parts of a shingle installation
Synthetic underlayment
Underlayment rows are lapped from the eaves up as the second line of defense.
Ridge ventilation
New flashing and balanced ventilation finish the system so the details match the shingles.
Starter strip
The edges get drip edge and starter shingles for a clean, sealed edge.
Ice barrier
An ice barrier lines the eaves, valleys and other leak-prone spots beneath the underlayment and shingles.
Related service
Architectural Shingle Installation Englewood, NJ
Architectural shingle installation follows the same order as any shingle roof, but the shingle has its own rules. The double thickness only holds if the nails catch both layers, so placement is checked as the roof goes on. Compatible starter and cap products finish the edges and ridge cleanly.
In Englewood, NJ, architectural shingles are the common choice for both new homes and reroofs. They stand up to wind better than 3-tab, hide small dips in the deck and usually last longer. Look at a few colors on a nearby roof in daylight before deciding.
Related service
Asphalt Shingle Roof Installation Englewood, NJ
Asphalt shingle roof installation is standard work, but the quality varies a lot from one crew to the next. Most early leaks on new shingle roofs come from flashing, nailing or missing starter, not from the shingles. Ask the roofer to explain the nailing pattern, the underlayment and how walls and valleys will be flashed.
A new asphalt roof in Englewood is usually installed in one to three days once the deck is ready. In cool months the sealant strips take longer to bond, and the edges get extra attention. Plan around a dry stretch, since the deck should never be covered while wet.
Local help
Shingle Roof Installation Near Me
Around Englewood, shingle installation covers new builds, garages, additions and full reroofs. From Englewood out to neighboring towns such as Englewood Cliffs, Leonia, Tenafly and Bergenfield, houses built decades ago tend to need ventilation and flashing upgrades when they get a new shingle roof, which is why the system under the shingles deserves as much attention as the color. Looking for a shingle roofer near me? Ask about the full system, from drip edge to ridge.
Searching for shingle roof installation near me from Englewood or Englewood Cliffs, Leonia, Tenafly and Bergenfield? Call (551) 355-3321 to talk to a roofer who works in your part of town.
What the local climate does to a roof
Cold winters bring snow, ice and a long stretch of freezing nights. Heat escaping from the attic melts snow on the upper roof, and the water refreezes at the colder eaves, building ice dams that push water up under the shingles. Strong coastal storms push rain into every weak spot at the flashing and valleys. That is why roof repair in Englewood is busiest after a hard winter and before the next one.
Why call
Why act early
Less damage
Small roof problems caught early usually stay small repairs.
Familiar with local homes
Roofers in Englewood know the roof types and weather wear common in local homes.
Straight answers
Ask the roofer about the cause, the options and the estimate before work starts.
Shingle Roof Installation FAQ
What goes under the shingles on a new roof?
Under the shingles sit drip edge, a self-adhering ice barrier in the leak-prone areas, a full layer of underlayment and starter shingles. Felt still works, but synthetic is tougher and holds up better if the roof sits open. Check that the shingle instructions and local code are both followed.
Which is better, 3-tab or architectural shingles?
A 3-tab shingle is thin and uniform, and an architectural shingle is thicker, heavier and layered. The thicker build gives architectural shingles better wind resistance and a longer life, and many lines no longer offer 3-tab. 3-tab can make sense on outbuildings or when matching an older roof.
Can shingles be installed in cold weather?
Warm, dry days give the best results for a shingle install. In cold weather shingles get stiff and the sealant strips need sun to bond, so roofers handle them carefully and often hand seal the edges. Wet decking is the hard stop at any time of year.
Why does nail placement matter on a shingle roof?
Shingles stay on because of correct nailing as much as sealant. Most shingles take four nails, or six in high-wind zones. Nails set too high miss the course below, and overdriven nails cut the mat, which is how shingles blow off a new roof.
What is the minimum pitch for asphalt shingles?
Shingles are made for slopes of 2 in 12 and steeper. Roofs that are low but still within range get added underlayment protection. Anything flatter needs a membrane roof such as TPO, EPDM or modified bitumen.
More questions? Call (551) 355-3321
Other services that may help
Shingle Roof Replacement
Full shingle roof replacement, from tear-off and deck repair to new shingles and flashing, including permits, cleanup and a final check.
Learn moreRoof Installation
Installing a new roof layer by layer, from drip edge and underlayment to flashing, vents and the finished roofing, with ventilation and flashing planned in from the start.
Learn moreRoof Ventilation
Balancing attic intake and exhaust with soffit vents, ridge vents and attic fans, so shingles and decking last as long as they should.
Learn moreGutter Installation
Seamless gutter installation sized to the roof, pitched to the downspouts and hung on hidden hangers, from K-style aluminum to half-round and copper.
Learn more
Looking for something else?
See all roofing servicesNeed shingle roof installation in Englewood, NJ?
Call (551) 355-3321 for a local roofer in Englewood and nearby towns.